Security Command XR200 Podręcznik Użytkownika Strona 25
- Strona / 55
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
21
21
User Codes continued
Programming Custom User Codes
In addition to the preset authority levels, you can also create custom
authority levels by selecting the CUSTOM option at the time the user
is being added to the system. This option allows you to assign
specific User Menu access to individual users.
Adding User Codes:
1. Access the User Menu.
2. Press COMMAND until USER CODES? displays. (NOTE: You
must have a level 9 authority. If you enter the User Menu with
a lower authority, the keypad will not display USER CODES?.)
3. Press any SELECT key. The keypad displays ADD DEL CHG.
4. Press the SELECT key under ADD to add a new user code.
5. At the USER NUMBER:- prompt, enter a user number and
press COMMAND. The display changes to CODE NO:- .
6. Enter a user code of 3 to 5 digits (4 digits on the Home/Away
system) and press COMMAND. The user enters this number
each time they arm, disarm, or make changes. If using access
cards, present the card instead of entering a code. After the
code is entered, the display changes to USER NUMBER ###.
7. A 16 character name may be entered to identify the user. Press
any top row key to clear the current name. You may then enter
the new name. After the name is entered, press COMMAND.
See Entering Custom Names in the Appendix of this User’s
Guide.
8.
Areas systems only
- The display changes to AREAS: # # # #
(# = area number). Add or remove access to one or more areas
by pressing the corresponding number keys. Press COMMAND.
Note: You may only add areas that are assigned to your code.
User Menu
9. The display changes to LEVEL CUSTOM. Select LEVEL to
assign a standard set of authorized functions as outlined in the
User Code Authority Levels table on the previous page.
10. At the LEVEL: - display, enter an authority level from 1 to 9.
Press COMMAND. The displays shows USER # ADDED.
11. Select CUSTOM to customize the functions you want the user
to access. This allows users to have certain capabilities outside
of a standard authority level. The following chart shows the
custom menu with default selections.
ARM/DIS (arm & disarm) NO SYS STAT (system status) NO
ALM SLNC (alarm silence) NO SYS TEST (system test) NO
SNSR RST (sensor reset) NO USR CODE (user codes) NO
DOOR ACS (door access) NO SCHEDULS (schedules) NO
ARM AREA (armed areas) NO TIME (day, date, and time) NO
OUTPUTS (outputs on off) NO DIS EVNT (display events) NO
ZN STATS (zone status) NO EXTEND (extend closing) NO
BYPAS ZN (bypass zones) NO * TEMP CODE (temporary code) NO
ZONE MON (zone monitor) NO
* • NO makes this a permanent user code.
• YES makes this a temporary code that expires in 7 days.
12. Press the ARROW key to exit the User Menu.
Note: Customized codes are not restricted to the schedules.
☞ Browser Feature
Refer to the Appendix at the back of this guide for a diagram showing
you how to use the buitl-in Add User Codes browser.
User Codes continued
Programming Custom User Codes
In addition to the preset authority levels, you can also create custom
authority levels by selecting the CUSTOM option at the time the user
is being added to the system. This option allows you to assign
specific User Menu access to individual users.
Adding User Codes:
1. Access the User Menu.
2. Press COMMAND until USER CODES? displays. (NOTE: You
must have a level 9 authority. If you enter the User Menu with
a lower authority, the keypad will not display USER CODES?.)
3. Press any SELECT key. The keypad displays ADD DEL CHG.
4. Press the SELECT key under ADD to add a new user code.
5. At the USER NUMBER:- prompt, enter a user number and
press COMMAND. The display changes to CODE NO:- .
6. Enter a user code of 3 to 5 digits (4 digits on the Home/Away
system) and press COMMAND. The user enters this number
each time they arm, disarm, or make changes. If using access
cards, present the card instead of entering a code. After the
code is entered, the display changes to USER NUMBER ###.
7. A 16 character name may be entered to identify the user. Press
any top row key to clear the current name. You may then enter
the new name. After the name is entered, press COMMAND.
See Entering Custom Names in the appendix of this User’s
Guide.
8.
Areas systems only
- The display changes to AREAS: # # # #
(# = area number). Add or remove access to one or more areas
by pressing the corresponding number keys. Press COMMAND.
Note: You may only add areas that are assigned to your code.
User Menu
9. The display changes to LEVEL CUSTOM. Select LEVEL to
assign a standard set of authorized functions as outlined in the
User Code Authority Levels table on the previous page.
10. At the LEVEL: - display, enter an authority level from 1 to 9.
Press COMMAND. The displays shows USER # ADDED.
11. Select CUSTOM to customize the functions you want the user
to access. This allows users to have certain capabilities outside
of a standard authority level. The following chart shows the
custom menu with default selections.
ARM/DIS (arm & disarm) NO SYS STAT (system status) NO
ALM SLNC (alarm silence) NO SYS TEST (system test) NO
SNSR RST (sensor reset) NO USR CODE (user codes) NO
DOOR ACS (door access) NO SCHEDULS (schedules) NO
ARM AREA (armed areas) NO TIME (day, date, and time) NO
OUTPUTS (outputs on off) NO DIS EVNT (display events) NO
ZN STATS (zone status) NO EXTEND (extend closing) NO
BYPAS ZN (bypass zones) NO * TEMP CODE (temporary code) NO
ZONE MON (zone monitor) NO
* • NO makes this a permanent user code.
• YES makes this a temporary code that expires in 7 days.
12. Press the ARROW key to exit the User Menu.
Note: Customized codes are not restricted to the schedules.
☞ Browser Feature
Refer to the Appendix at the back of this guide for a diagram showing
you how to use the buitl-in Add User Codes browser.
- User’s Guide 1
- Table of Contents 3
- Emergency Evacuation Plans 4
- Introduction 5
- The Security Command Keypad 6
- Special Wireless Displays 7
- General Arming Operation 10
- Area System Arming 11
- Area System Disarming 12
- Interior 13
- Perimeter 13
- Home/Away System Arming 15
- Home/Away System Disarming 16
- User Menu 17
- Alarm Silence 18
- Sensor Reset 18
- Door Access 19
- Armed Areas Display 19
- Outputs On Off 20
- Zone Status 20
- Zone Status continued 21
- Bypass Zones 21
- Zone Monitor 22
- System Status 23
- System Test 23
- User Codes 24
- Areas systems only 25
- Schedules 27
- Schedules continued 28
- Relay Output Schedules 29
- Setting the Date and Time 31
- Display Events 32
- Door Access Event Displays 35
- Zone Bypass Event Displays 36
- SERVICE REQUEST? 36
- System Setup 37
- Security Command keypads 37
- Suggestion 40
- Frequently asked questions 41
- Zone Status Browser 42
- Bypass Zones Browser 43
- Zone Monitor Browser 44
- Add User Codes Browser 45
- Delete User Codes Browser 46
- Change User Codes Browser 47
- Entering Custom Names 48
- Easy Entry™ User's Guide 49
- Appendix 50
- Cut along dotted lines 51
- Numeric Pager Display 52
- FA100 User's Guide 53
- FA113 User's Guide 53
- LT-0287 (11/97) 55
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Security Command XR200
(4 strony)AEG Electrolux HM634070FB manuály
Uživatelské manuály a uživatelské příručky pro ne AEG Electrolux HM634070FB.
Poskytujeme 7 manuály pdf AEG Electrolux HM634070FB ke stažení zdarma podle typů dokumentů: Informační leták, Uživatelský manuál
Komentarze do niniejszej Instrukcji