Security Command XR200-485 Podręcznik Użytkownika Strona 26
- Strona / 52
- Spis treści
- BOOKMARKI
Oceniono. / 5. Na podstawie oceny klientów
20
20
Schedules
User Code Level: 7 and above.
Function: The Schedules function allows you to program into the
system the times at which you normally turn your burglary protection
on and off each day of the week. This information can then used by
the system to automatically arm or disarm the burglary protection.
If your system does not use automatic arming, you can use the
Closing Check/Extend feature with Schedules to help ensure your
system is armed manually at a specific time. This option sounds the
keypad buzzer and displays CLOSING TIME! when a schedule
expires. Users still on the premises are reminded to arm the system
or extend the schedule to a later time. If the system is not armed, or
the schedule extended, a report is sent to the central station.
Schedules can also be used to restrict access to the system by users
with a 1 or 2 level or special Allow (ALOW) authority assigned to their
user codes.
Your system provides you with four different types of schedules and
Holiday dates:
1. Permanent (PRM), Primary (PRI), and Secondary (SEC)
schedules occur at the same time until you change or delete
them.
2. Temporary (TEMP) schedules occur only once and then are
cleared. These are typically used to allow someone off hours
access to the premises when used with a level 1 or 2 code or
special Allow authority.
3. Output (OUT) schedules allow you to set the times when relay
outputs connected to your system turn on and off automatically.
4. Door (DOOR) schedules allow you to set times when door strikes
turn on and off automatically.
5. Holiday (HOL) dates allow you to enter dates that are used to
activate schedules.
Setting an Arming and Disarming Schedule
1. Access the User Menu and press COMMAND until SCHEDULES?
displays. Press any SELECT key.
2. The keypad displays PRM TMP OUT DOOR (or PRI SEC OUT
DOOR). Press the SELECT key under PRM (or PRI). This will
allow you to enter a schedule that remains in place until you
change or delete it.
3. The keypad displays SUN MON TUE WED. Press the COMMAND
key to display THU FRI SAT HOL. Press the SELECT key under
the day you want the schedule to begin.
Note: After selecting the day of the week for the schedule to begin,
the keypad displays any currently programmed Opening and
Closing times previously set for that day. This feature allows you
to review programmed schedules at any time. A schedule entered
in HOL (holiday) will be active and override SUN MON TUE etc.
schedules anytime a Holiday Date occurs.
4. If Opening and Closing times are displayed, the keypad then
displays DELETE KEEP. Press the SELECT key under
DELETE to enter new times.
5. The keypad then displays OPENING TIME? followed by the
display MON – : AM PM. Enter the new opening time and
select AM or PM.
Enter all schedule times using a 12 hour clock. For example, to
enter 6 AM you would enter a 0 + 6 + 0 + 0 and press the SELECT
key under AM.
The keypad then displays CLOSING TIME? followed by the
display MON – : AM PM. Enter the new closing time and select
AM or PM. Pressing the SELECT key under the day MON
(whichever day is displayed) allows you to scroll through the days
of the week and create a schedule window that spans multiple
days.
User Menu
Schedules
User Code Level: 7 and above.
Function: The Schedules function allows you to program into the
system the times at which you normally turn your burglary protection
on and off each day of the week. This information can then used by the
system to automatically arm or disarm the burglary protection.
If your system does not use automatic arming, you can use the Closing
Check/Extend feature with Schedules to help ensure your system is
armed manually at a specific time. This option sounds the keypad
buzzer and displays CLOSING TIME! when a schedule expires. Users
still on the premises are reminded to arm the system or extend the
schedule to a later time. If the system is not armed, or the schedule
extended, a report is sent to the central station.
Schedules can also be used to restrict access to the system by users
with a 1 or 2 level or special Allow (ALOW) authority assigned to their
user codes.
Your system provides you with four different types of schedules and
Holiday dates:
1. Permanent (PRM), Primary (PRI), and Secondary (SEC)
schedules occur at the same time until you change or delete them.
2. Temporary (TEMP) schedules occur only once and then are
cleared. These are typically used to allow someone off hours
access to the premises when used with a level 1 or 2 code or
special Allow authority.
3. Output (OUT) schedules allow you to set the times when relay
outputs connected to your system turn on and off automatically.
4. Door (DOOR) schedules allow you to set times when door strikes
turn on and off automatically.
5. Holiday (HOL) dates allow you to enter dates that are used to
activate schedules.
Setting an Arming and Disarming Schedule
1. Access the User Menu and press COMMAND until SCHEDULES?
displays. Press any SELECT key.
2. The keypad displays PRM TMP OUT DOOR (or PRI SEC OUT
DOOR). Press the SELECT key under PRM (or PRI). This will
allow you to enter a schedule that remains in place until you
change or delete it.
3. The keypad displays SUN MON TUE WED. Press the COMMAND
key to display THU FRI SAT HOL. Press the SELECT key under
the day you want the schedule to begin.
Note: After selecting the day of the week for the schedule to begin,
the keypad displays any currently programmed Opening and
Closing times previously set for that day. This feature allows you
to review programmed schedules at any time. A schedule entered
in HOL (holiday) will be active and override SUN MON TUE etc.
schedules anytime a Holiday Date occurs.
4. If Opening and Closing times are displayed, the keypad then
displays DELETE KEEP. Press the SELECT key under
DELETE to enter new times.
5. The keypad then displays OPENING TIME? followed by the
display MON – : AM PM. Enter the new opening time and
select AM or PM.
Enter all schedule times using a 12 hour clock. For example, to
enter 6 AM you would enter a 0 + 6 + 0 + 0 and press the SELECT
key under AM.
The keypad then displays CLOSING TIME? followed by the
display MON – : AM PM. Enter the new closing time and select
AM or PM. Pressing the SELECT key under the day MON
(whichever day is displayed) allows you to scroll through the days
of the week and create a schedule window that spans multiple
days.
User Menu
- User’s Guide 1
- LT-0364 (4/99) 4
- Table of Contents 5
- Emergency Evacuation Plans 6
- Introduction 7
- The Security Command Keypad 8
- Special Wireless Displays 9
- General Arming Operation 12
- Area System Arming 13
- Area System Disarming 14
- User Menu 15
- Alarm Silence 16
- Sensor Reset 16
- Door Access 17
- Armed Areas Display 17
- Outputs On Off 18
- Zone Status 18
- Zone Status continued 19
- Bypass Zones 19
- Zone Monitor 20
- System Status 21
- System Test 21
- Custom User Codes 22
- Custom User Codes continued 23
- Deleting User Codes 25
- Changing User Codes 25
- Schedules 26
- Schedules continued 29
- Setting the Date and Time 30
- Display Events 31
- Door Access Event Displays 34
- Zone Bypass Event Displays 35
- SERVICE REQUEST? 35
- Security Command keypads 36
- System Setup 36
- User Codes 38
- Suggestion 39
- Frequently asked questions 40
- Zone Status Browser 41
- Bypass Zones Browser 42
- Zone Monitor Browser 43
- Add User Codes Browser 44
- Delete User Codes Browser 45
- Change User Codes Browser 46
- Entering Custom Names 47
- Easy Entry™ User's Guide 48
- Cut along dotted lines 49
- Numeric Pager Display 50
- FA113 User's Guide 51
- Appendix 52
Powiązane produkty i podręczniki dla Systemy kontroli dostępu bezpieczeństwa Security Command XR200-485
AEG Electrolux HM634070FB manuály
Uživatelské manuály a uživatelské příručky pro ne AEG Electrolux HM634070FB.
Poskytujeme 7 manuály pdf AEG Electrolux HM634070FB ke stažení zdarma podle typů dokumentů: Informační leták, Uživatelský manuál
Aeg electrolux HM634070FB Informační leták (24 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 5.91 MB |
Tabulka s obsahem
Aeg electrolux HM634070FB Informační leták (4 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 0.46 MB |
Tabulka s obsahem
Aeg electrolux HM634070FB Uživatelský manuál (16 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 2.27 MB |
Tabulka s obsahem
Aeg electrolux HM634070FB Uživatelský manuál (40 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 7.25 MB |
Tabulka s obsahem
SISÄLLYS
2
Lapsilukko
10
ΠΕΡΙΕΧΌΜΕΝΑ
14
ΕΓΚΑΤΆΣΤΑΣΗ
16
Εγκατάσταση
18
Κλείδωμα
23
INNEHÅLL
28
INSTALLATION
29
Montering
30
Signalur
36
MILJÖSKYDD
39
Aeg electrolux HM634070FB Uživatelský manuál (16 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 2.26 MB |
Tabulka s obsahem
Aeg electrolux HM634070FB Uživatelský manuál (16 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 2.26 MB |
Tabulka s obsahem
SISÄLLYS
2
Lapsilukko
10
Aeg electrolux HM634070FB Uživatelský manuál (16 strany)
Značka: Aeg-electrolux | Kategorie: No info | Velikost: 2.31 MB |
Tabulka s obsahem
Κλείδωμα
11
Další produkty a příručky pro ne AEG Electrolux
| Modely | Typ Dokumentu |
|---|---|
| S85596SK |
Uživatelský manuál
 
Aeg-Electrolux S85596SK Uživatelský manuál [da] ,
232 stránky
|
| B5901-5-M |
Uživatelský manuál
Aeg-Electrolux B5901-5-M Manual de utilizare [da] ,
32 stránky
|
| HK654070XB | Uživatelský manuál Aeg-Electrolux HK654070XB Brukermanual, 16 stránky |
| B41013-5-M | Uživatelský manuál Aeg-Electrolux B41013-5-M Εγχειρίδιο χρήστη, 32 stránky |
| BE5003421M |
Uživatelský manuál
Aeg-Electrolux BE5003421M Manuali i perdoruesit [ua] ,
32 stránky
|
| 68031K-MN 68U |
Uživatelský manuál
Aeg-Electrolux 68031K-MN 68U Vartotojo vadovas [en] ,
28 stránky
|
| HK614000XB |
Uživatelský manuál
Aeg-Electrolux HK614000XB Manual de usuario,
16 stránky
|
| E33519-5-W |
Uživatelský manuál
Aeg-Electrolux E33519-5-M User Manual,
28 stránky
|
| EP5004031M | Uživatelský manuál Aeg-Electrolux EP5004031M Användarmanual [it] [ru] [sk] , 36 stránky |
| B9878-5-M |
Rychlý návod
Aeg-Electrolux B9878-5-M Упатство за брз почеток [sv] ,
2 stránky
|
| 40056VH-MN | Uživatelský manuál Aeg-Electrolux 40056VH-MN Εγχειρίδιο χρήστη, 64 stránky |
| HE604000XB |
Uživatelský manuál
Aeg-Electrolux HE604000XB Brugermanual [et] [kk] [lv] ,
32 stránky
|
| FP4400 |
Uživatelský manuál
Aeg-Electrolux FP4400 Benutzerhandbuch,
38 stránky
|
| F88050IW |
Uživatelský manuál
Aeg-Electrolux F88050IW Kasutusjuhend,
36 stránky
|
| USR200 |
Uživatelský manuál
Aeg-Electrolux USR200 Uživatelský manuál,
44 stránky
|
| 41056VH-MN 23T |
Uživatelský manuál
Aeg-Electrolux 41056VH-MN 23T Vartotojo vadovas [pl] ,
64 stránky
|
| FAVCELEBRATION |
Uživatelský manuál
Aeg-Electrolux FAVCELEBRATION Benutzerhandbuch [en] ,
44 stránky
|
| 63456IU-WN | Uživatelský manuál Aeg-Electrolux 63456IU-WN Brugermanual [de] , 44 stránky |
| B98203-5-M | Receptář Aeg-Electrolux B98203-5-M Recipe Book, 36 stránky |
| BS7304021M |
Uživatelský manuál
Aeg-Electrolux BS7304021M Handleiding [ua] ,
32 stránky
|
© 2020, manymanuals.pl. Wszelkie prawa zastrzeżone. | 0.031 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Komentarze do niniejszej Instrukcji